Adjusting The Headlight Beams; Handlebar Position; Opening And Closing The Cowling Vents - Yamaha FJR13AF 2014 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Adjusting the headlight beams

The headlight beam adjusting knobs
are used to raise or lower the height of
the headlight beams. It may be neces-
sary to adjust the headlight beams to
increase visibility and help prevent
blinding oncoming drivers when carry-
4 ing more or less load than usual. Obey
local laws and regulations when ad-
justing the headlights.
To raise the headlight beams, turn the
knobs in direction (a). To lower the
headlight beams, turn the knobs in di-
rection (b).
(b) (a)
1
1. Headlight beam adjusting knob
EAU39612

Handlebar position

The handlebars can be adjusted to one
of three positions to suit the rider's
preference. Have a Yamaha dealer ad-
just the position of the handlebars.
1
1. Handlebar
(b) (a)
1
EAU39642
Opening and closing the cowl-
ing vents
The cowling vents can be opened 20
mm (0.79 in) for added ventilation to
suit the riding conditions.
1
1. Closed position
2. Open position
To open a cowling vent
1. Remove the quick fastener.
2. Slide the cowling vent panel for-
4-36
1
ward to unhook its projections
from the lower slots, and then pull
the panel off.
EAU54151
2