Yamaha FJR13AF 2014 Owner's Manual page 33

 Shifting the transmission into gear
and starting off, or turning the key
to "OFF", saves all settings made,
then exits the setting mode.
Push and hold the menu switch
"MENU" for at least 2 seconds to enter
the setting mode. To exit the setting
mode and return to the normal display,
push and hold the menu switch
"MENU" again for at least 2 seconds.
Display Description
This function allows you to
set the low, middle, and
Grip Warmer
high settings to 10 tem-
perature levels.
This function allows you to
check and reset the "OIL"
oil change interval (dis-
Maintenance
tance traveled), and the
"FREE-1" and "FREE-2"
maintenance intervals.
INSTRUMENT AND CONTROL FUNCTIONS
This function allows you to
check and reset the
"TIME–2" and "TIME–3"
functions. These time trips
show the total elapsed
time that the key has been
in the "ON" position. When
the key is turned to "OFF",
Time Trip
the trip times stop count-
ing but are not reset. The
maximum time that can be
shown is 99:59.
When the time trips reach
99:59, they automatically
reset to 0:00 and continue
counting.
This function allows you to
switch the display units
between kilometers and
miles. When kilometers are
Unit
selected, the fuel con-
sumption units can be
switched between
"L/100km" and "km/L".
This function allows you to
change the items shown in
Display
3 information displays.
This function allows you to
adjust the brightness of
the multi-function meter
Brightness
unit panel to suit the out-
side lighting conditions.
This function allows you to
Clock
set the clock.
This function allows you to
reset all items, except the
All Reset
odometer and the clock.
4-15
Adjusting the temperature levels of the
grip warmer settings
1. Use the select switch to highlight
"Grip Warmer".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the menu switch "MENU".
The grip warmer setting display
will be shown and "High" will flash
in the display.
Grip Warmer
Hi g h
10
Middle
5
Low
1
4