Replacing A Front Turn Signal Light Bulb Or An Auxiliary Light Bulb; Replacing The Tail/Brake Light Bulb Or A Rear Turn Signal Light Bulb - Yamaha Mio Amore AL115 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a front turn signal
light bulb or an auxiliary light
bulb
If a front turn signal light or an auxiliary
light bulb burns out, replace it as fol-
lows.
1. Remove cowlings A. (See page
7-6.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
7
2
1. Turn signal light bulb socket (x 2)
2. Auxiliary light bulb socket (x 2)
EAU37681 3. Remove the burnt out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the cowlings.
Replacing the tail/brake light
bulb or a rear turn signal light
bulb
Place the vehicle on the centerstand.
Tail/brake light bulb
1. Open the seat. (See page 4-7 for
2. Remove panel B. (See page 7-5.)
1. Tail/brake light bulb socket
3. Remove the tail/brake light bulb
7-29
seat opening and closing proce-
dures.)
socket by turning it counterclock-
wise.
EAUU0301