System Connections; Connection To A Personal Computer - JVC GR-DVM55EG Instructions Manual

74
EN
[A] Using USB or PC connection cable
[B] Using DV cable

Connection To A Personal Computer

[A] Using USB or PC connection cable
This camcorder can transfer still images to a PC by
using the provided software.
[B] Using DV cable
It is also possible to transfer still images to a PC with
a DV connector by using software equipped with the
PC or commercially available software.
1
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
2
For GR-DVM75 Owners: If you are using the
USB connection, set the VIDEO/DSC switch to
" ".
•Only the still images stored in the memory
card can be transferred to a PC.
3
Turn the camcorder's Power Switch to "
while pressing down the Lock Button located on
the switch and turn on the PC.
•Refer to the instruction manual of the software
on how to transfer a still image to the PC.
GR-DVM55 only
To PC
To USB
GR-DVM75 only
To DV IN/OUT
Open the connector cover.

SYSTEM CONNECTIONS

PC connection cable
(provided)
USB cable
(provided)
OR
DV cable
(optional)
Core filter
NOTES:
In order to maintain optimum performance of the
camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one core
filter, the end that is closest to the filter should be
connected to the camcorder.
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
Never connect the USB or PC connection cable and the
DV cable simultaneously to the camcorder. Connect
only the cable you wish to use to the camcorder.
If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not enter
the USB mode.
The date/time information cannot be captured into the
PC.
Refer to the instruction manuals of the PC and Software.
The still images can also be transferred to a PC with a
DV connector-equipped capture board.
When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable
depending on the type of DV connector (4 or 6 pins)
"
on the PC, or use the DV cable provided with the
capture board.
The system may not work properly depending on the
PC or capture board you are using.
For GR-DVM75 Owners:
"USB MODE" and/or "ACCESSING FILE" appears
on the LCD monitor while the PC is accessing data
in the camcorder or the camcorder is transferring a
file to the PC.
NEVER disconnect the USB cable while
"ACCESSING FILE" is displayed on the LCD
monitor since this can result in product damage.
To
RS-232C
To USB
connector
To DV
connector
Core filter
PC with DV connector
PC
pg. 9).