Dubbing Still Images Recorded On A Tape To A Memory Card; (Gr-Dvm75 Only) - JVC GR-DVM55EG Instructions Manual

60
EN
Play/Pause Button
(4/6)
MENU Wheel
Display
COPY – OF F
ON
VIDEO/DSC Switch
Power Switch
Lock Button
SNAPSHOT
Button
VIDEO Menu
6
SP
Dubbing Still Images Recorded On A Tape
To A Memory Card (GR-DVM75 only)
Still images can be dubbed from a tape to a memory
card.
1
Load a memory card (
( pg. 12).
2
Select the Snapshot mode in the Menu Screen
( pg. 26) to use for dubbing the image to the
memory card.
3
Set the VIDEO/DSC Switch to "VIDEO", then set the
Power Switch to "
Lock Button located on the switch.
4
Press the MENU Wheel in. The Menu Screen
appears. Rotate it to select "
it. The VIDEO Menu appears.
5
Rotate the MENU Wheel to select "
COPY" and press it. The Sub Menu appears. Rotate
it to select "ON" and press it. Selection is complete.
6
Rotate the MENU Wheel to select " RETURN" and
press it twice. The normal playback screen resumes.
7
To select a still image to be dubbed, start playback
by pressing 4/6. At the moment you find the
image you wish to dub, press it again to engage Still
Playback.
8
To start dubbing, press SNAPSHOT. The selected
image is stored in the memory card.
•" " blinks during dubbing.
NOTES:
If SNAPSHOT is pressed in step 8 when a memory card
is not loaded, the message "COPYING FAILED" is
displayed.
If an image recorded on the tape using the WIDE mode
( pg. 40) is dubbed to a memory card, the WIDE
mode identifying signal is not dubbed with it.
To use Playback Special Effects with a video image you
wish to dub, perform up to step 8 using the remote
control (provided) (
Images are dubbed in VGA file size.
DUBBING
pg. 14) and cassette
" while pressing down the
VIDEO" and press
pg. 65).
(cont.)