For Recording; Night-Alive - JVC GR-DVM55EG Instructions Manual

FOR RECORDING

NIGHT-ALIVE Button

Night-Alive

Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is
strobing due to the slow shutter speed.
1
Power Switch
2
Lock Button
To Deactivate Night-Alive . . .
NOTES:
Set the Power Switch to "
the Lock Button located on the Switch. Open the
LCD monitor fully or pull out the viewfinder fully.
Press NIGHT-ALIVE so that the Night-Alive indicator
" " appears.
•The shutter speed is automatically adjusted to
provide up to 30 times sensitivity.
•" " appears beside "
is being automatically adjusted.
... press NIGHT-ALIVE again so that the Night-Alive
indicator disappears.
During Night-Alive, the following functions or settings
cannot be activated and its indicator blinks or goes out:
• Some modes of "Program AE With Special Effects"
( pg. 46, 47), "Picture Wipe/Dissolve" (
49) and "Digital Sound Effects" (
• "Snapshot Flash" (
• "GAIN UP" in CAMERA MENU (
• "DIS" in MANUAL MENU (
During Night-Alive, it may be difficult to bring the
camcorder into focus. To prevent this, use of a tripod is
recommended.
EN
" while pressing down
" while the shutter speed
pg. 56).
pg. 54).
pg. 39).
pg. 39).
45
pg. 48,