Automatic Demonstration - JVC GR-DVM55EG Instructions Manual

6
EN
Automatic Demonstration takes place
when "DEMO MODE" is set to "ON"
(factory-preset).
Available when the Power Switch is set to
" " or " " and no cassette is in the
camcorder.
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for
more than 1 minute after that, the demonstra-
tion will resume.
"DEMO MODE" remains "ON" even if the
camcorder power is turned off.
To cancel Automatic Demonstration:
1. Set the Power Switch to "
pressing down the Lock Button located on
the switch and press the MENU Wheel in.
The Menu Screen appears.
2. Rotate the MENU Wheel to select "
SYSTEM" and press it. The SYSTEM Menu
appears.
3. Rotate the MENU Wheel to select "DEMO
MODE" and press it. The Sub Menu
appears.
4. Rotate the MENU Wheel to select "OFF"
and press it.
5. Rotate the MENU Wheel to select
" RETURN", and press it twice. The
normal screen appears.

AUTOMATIC DEMONSTRATION

" while
MENU Wheel
Sub Menu
DEMO MODE – OF F
ON
GR-DVM75 only
Power Switch
Lock Button