Related Manuals for JWA DARLINGTON 68950
Summary of Contents for JWA DARLINGTON 68950
- Page 1 ASSEMBLY INSTRUCTION DARLINGTON Coffee Table ITEM CODE: 68950 900MM 400MM Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
- Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of 3. Ensure that you have all required contents for complete assembly 4.
- Page 4 STEP 1: • Prepare a protected surface, either with a blanket or cardboard. • Attached the 3x legs(3) to the leg support(2) as shown below. • Secure with 2x Bolt(B) per connection, fasten with Allen Key (F). • Tighten only until the bolt is a little firm in the thread, do not fasten completely.
- Page 5 STEP 2: • Prepare 3x bolt A sets by threading bolt(A) through spring washer(D) then washer(C) • Attach the legs to the Table Top(1) as shown below. • Secure with Bolt (A), Fasten with Allen Key (F).
- Page 6 STEP 3: • Attach the 3x Non-slip Discs (E) to the bottom of each leg. • Stand the table the right way up on a level surface. Push down on the table until it levels out. Do not lean beyond your own balance. •...
- Page 7 ASSEMBLY IS COMPLETE...
- Page 8 PRODUCT CARE: To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the DARLINGTON 68950 and is the answer not in the manual?
Questions and answers