Subscribe to Our Youtube Channel
Related Manuals for JWA FERMO 68529
Summary of Contents for JWA FERMO 68529
- Page 1 ASSEMBLY INSTRUCTION FERMO BUFFET ITEM CODE 68529 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
-
Page 2: Pre-Assembly Preparation
PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when li ing. Product should be assembled as near as possible to the point of use 3. -
Page 3: Parts List
PARTS LIST M7X39mm M14.8X12mm M8X30mm M3.5X14mm 12pcs 12pcs 22pcs 40pcs M5X40mm M6X50mm M6X45mm 8pcs 12pcs 4pcs 1pcs M3X16mm 2pcs 2pcs 4pcs 22pcs M8X50mm 4pcs 4pcs 1pcs 2pcs M4x30mm M3.5x14mm 1pcs SIDE PANEL SUPPORT PANEL SIDE PANEL TOP PANEL MIDDLE PANEL BACK PANEL DOOR SHELF... - Page 4 STEP 1: STEP 2:...
- Page 5 STEP 3: STEP 4:...
- Page 6 STEP 5: STEP 6: Please do not tighten screws to the end of skirts，just keep the screw head to the same level of skirts.
- Page 7 STEP 7: Firstly locate screw into short side of leg，and locate screws of long side， then tighten all screws. STEP 8:...
- Page 8 STEP 9: STEP 10: × 2...
- Page 9 STEP 11:...
- Page 10 STEP 12: ASSEMBLY COMPLETE...
- Page 11 SAFETY BRACKETS INSTRUCTIONS 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
- Page 12 To protect your furniture, we suggest the following: Avoid placing your furniture in direct sunlight. Do not place furniture directly under windows. Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the nish.
Need help?
Do you have a question about the FERMO 68529 and is the answer not in the manual?
Questions and answers