Subscribe to Our Youtube Channel
Related Manuals for JWA BOLZANO 68946
Summary of Contents for JWA BOLZANO 68946
- Page 1 ASSEMBLY INSTRUCTION BOLZANO Lamp Table ITEM CODE: 68946 600MM 560MM Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
- Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of 3. Ensure that you have all required contents for complete assembly 4.
- Page 4 STEP 1: • Prepare a protected surface, either with a blanket or cardboard. • Combine 2x Legs(2) as shown below. Secure with Bolt (A), fasten with Allen Key (F). • Tighten only until the bolt is a little firm in the thread, do not fasten completely.
- Page 5 STEP 2: • Prepare 4x bolt B sets by threading bolt(B) through spring washer(C), then washer(D). • Attach the legs to the Table Top(1) as shown above. • Secure with a bolt B set on each leg. Fasten with Allen Key (F).
- Page 6 STEP 3: • Attach the 4x Non-slip Discs (E) to the bottom of each leg. • Flip the table over, and place on level surface. • Push down on table until it levels out, do not lean beyond your own balance. •...
- Page 7 ASSEMBLY IS COMPLETE...
- Page 8 PRODUCT CARE: To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the BOLZANO 68946 and is the answer not in the manual?
Questions and answers