Table of Contents
Advertisement
6 USING THE SYSTEM
6.6.2 Displaying distribution ratios and energy usage by tenant
Use this screen to check the distribution ratios and energy usage by tenant.
Procedure
Select 3.Distrib. ratio/Usage in the main menu and 2.Each tenant in the sub menu.
*When "No Distrib." is selected, this screen is not accessible. (see
A Selects the distribution group to display.
B Selects either the current or the past (maximum 24 months) cut-off data.
C Selects the time zone to display.
D Switches the gas distribution ratio and gas usage display between values for air conditioning
and values for power generation.
When "Gas usage" is displayed: Gas distribution ratios and usage for air conditioning are
shown.
When "Gas use/PwrGen" is displayed: Gas distribution ratios and usage for power generation
are shown.
For air conditioning units without a power generation feature, " – " appears under gas usage
for power generation and gas distribution ratio.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
A
• If the product type is HOT Multi, unit amount will be displayed in m
• If no pulse meter is connected, power usage and gas usage are not displayed.
• Gas usage and distribution ratios are not displayed for PAC units.
CZ-256ESMC1U̲改.indb 47
CZ-256ESMC1U̲改.indb 47
1.All hours
2.Regular hours
1.Each I/D unit
3.Out of hours
4.Special Day
2.Each tenant
D
47
5
1
5
1
)
Main
Sub
C
B
3
or liters.
3
2
3
2
Main
Sub
2011/11/11 11:25:31
2011/11/11 11:25:31
Advertisement
Table of Contents
