Displaying General Information By Zone - Panasonic CZ-256ESMC1U Operating Instructions Manual

6 USING THE SYSTEM

6.4.3 Displaying general information by zone

Use this screen to display the state of all units in a zone and to operate those units.
Procedure
Select 1.Status/Control in the main menu and 3.Each zone in the sub menu.
A When you touch a unit name, a remote control window for individual operations appears.
B When you touch a zone name, a remote control window for operating all units in the zone
appears.
C When you touch All units , a remote control window for operating all connected units
appears.
B
Move the display position on the
screen up and down one line.
The fi rst twelve characters are displayed for zone names and unit names.
CZ-256ESMC1U̲改.indb 36 CZ-256ESMC1U̲改.indb 36
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
A
A
1.Each tenant
2.Each tenant details
3.Each zone
4.Each zone details
5.All units
36
1 3
1 3
Main Sub
C
(FRI) 4/Aug 3:10PM
2011/11/11 11:25:24 2011/11/11 11:25:24