Restoring Data - Panasonic CZ-256ESMC1U Operating Instructions Manual

6 USING THE SYSTEM
I When a screen like the one shown below appears, touch the Check button.
[File form]
A fi le name is fi xed as follows according to the year, month, and date when the distribution data
output was carried out.
When outputting repeatedly on the same day, the last "A" varies as B, C, D, and so forth.
(Outputting is possible up to 26 times a day).
Data composition in the fi le is the same as that in a cut-off processing fi le.
[Caution]
Distribution data fi les are stored in the "Data" folder.
Copy output distribution data fi les to your PC and then delete them from the PC card.
When distribution data fi les are too many, normal backups of cut-off data may become impossible.

6.5.5.4 Restoring data

Proceed as follows to restore setting data and total data from optional PC Cards.
Procedure
J Insert a PC card and touch the Restore button.
K When a window like the one shown below
appears, touch the OK button.
* When trying to restore data backed up using an old-version Intelligent Controller, a message
"Unsupported fi le version. Perform Restore?" will be displayed; confi rm the message and touch "Yes".
After completing restoring, "Rebooting." will be displayed and then touch "OK". The data restored
will be effective after rebooting. (After "Converting data" is displayed for a while, the system will
automatically reboot again.)
* Everyday, at 11:30 PM to 12:00 AM, cut-off processing take place, when you cannot press the Restore
button.
Use the special optional PC Cards to back up and restore Intelligent Controller data. For details about using
PC Cards, refer to the instructions of the PC Cards.
Depending on the amount of data, backup and restore operations may require up to 15 minutes.
CZ-256ESMC1U̲改.indb 45 CZ-256ESMC1U̲改.indb 45
20060316A.csv (Example of a fi le output on March 16, 2006)
45
L When a window like the one shown below
appears, touch the Check button.
2 5
2 5
Main Sub
2011/11/11 11:25:30 2011/11/11 11:25:30