Table of Contents
Advertisement
2.1.2 Mounting in hanging Position (Head first)
To operate the
coupler (clamp) which is mounted directly onto the bottom side of the
system. It is fixed centrically with a M10 thread bolt (max. length 11 mm).
2.1.3 Mounting in sidewise Position
To operate the
half-couplers (clamps) which are mounted directly onto the bottom side
of the system. They are fixed with two M10 thread bolts (max. length 11
mm).
This technique is necessary to cope with the torque which accrues in this
mounting position. In addition it allows a concentrically position between
two truss belts. Never use the "Mounting in hanging Position" technique
described above to fasten the system in the sidewise position. A safe
and sound installation can not be assured in this way. This also can
damage the system base.
GLP
German Light Products GmbH
R
-
G
-
B
R
-
G
-
B
R
-
G
-
B
V
O
L
K
S
L
I
C
H
T in an hanging position, please use a half-
V
O
L
K
S
L
I
C
H
T
89
3x M10
(max. length 11mm)
V
O
L
K
S
L
I
C
H
T in an sidewise position, please use two
V
O
L
K
S
L
I
C
H
T
(Instruction version 1.0) / from software version 1.08)
7
Advertisement
Table of Contents
