3M 306S1043 User Instructions
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Safety Equipment
  5. 306S1043
  6. User instructions

3M 306S1043 User Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AS/NZS 1891.1:2007
Lic: BMP 537160
8
7
6
2
4
8
A
6
1
4
8
B
5
1
4
NOTES:
2
1. REFER TO STITCH PATTERN MAXTRIX FOR THREAD TYPES.
2. USE THREAD M046-15-WHITE FOR ALL HAND STITCHING 9598574. ALL HAND STITCHING
9598574 TO BE THROUGH ALL.
3. LABELS TO BE COVERED WITH PROTECTIVE PLASTIC AND STITCHED ALL AROUND WITH
THREAD M046-15-WHITE OR EQUIVALENT.
4. FREE STITCHING TO BE M046-15-WHITE THROUGH ALL.
5. FREE STITCHING 9598574 TO USE THREAD M092-BLACK.
7
6. INSPECT HARNESS CONTAINS ALL STITCH PATTERNS AS PER THE BILL OF MATERIAL.
7. INSPECT ALL STITCH PATTERNS ARE COMPLETE.
8. INSPECT THE WEB FOR TWISTS.
9598296
C
M092-BLACK
9. INSPECT ALL PRODUCT CARDS AND MARKINGS ARE LEGIBLE.
5
NOTES:
1. REFER TO STITCH PATTERN MATRIX FOR THREAD TYPES.
2. USE THREAD M046-15-WHITE FOR ALL HAND STITCHING 9598574. ALL HAND STITCHING
9598574 TO BE THROUGH ALL.
3. LABELS TO BE COVERED WITH PROTECTIVE PLASTIC AND STITCHED ALL AROUND WITH
THREAD M046-15-WHITE OR EQUIVALENT.
4. FREE STITCHING TO BE M046-15-WHITE THROUGH ALL.
5. STITCH PATTERN 9598564 THROUGH TOP 2 LAYERS ONLY.
6. FREE STITCHING 9598574 TO USE THREAD MO92-BLACK.
7. INSPECT HARNESS CONTAINS ALL STITCH PATTERNS AS PER THE BILL OF MATERIAL.
8. INSPECT ALL STITCH PATTERNS ARE COMPLETE.
9. INSPECT THE WEB FOR TWISTS.
9598296
M092-BLACK
10.INSPECT ALL PRODUCT CARDS AND MARKINGS ARE LEGIBLE.
BSI Certi ed Product
5
Harness
Harness
style
Model
306S1043
306M1043
306L1043
B
306XL1043
306M1043E
306L1043E
6
320S2066NK
320M2066NK
A
320L2066NK
320XL2066NK
560S1025
560M1025
H
560L1025
560XL1025
803S0009
G
C
803M0009
I
B
F
803L0009
C
A
803XL0009
B
B
P
I
Q
F
803XS0018
D
6
803S0018
803M0018
803LS0018
J
O
803XL0018
A
803XXL0018
N
K
G
L
M
803S0019
G
C
803M0019
803L0019
803XL0019
803S0054
C
I
803M0054
F
803L0054
C
B
803XL0054
TABLE 1
B
A
SEE NOTE 5
PRODUCT NO:
ITEM 8 (m)
ITEM 46 (m)
F
803S1009
2.9
2.25
I
803M1009
2.9
2.35
5
D
803L1009
3.1
2.45
803XL1009
3.3
2.55
STITCH PATTERN MATRIX
D
D
9598561
9598562
9598564
9598573
G
M046-12-WHITE
M046-12-WHITE
E
M046-12-WHITE
M092-BLACK
A
R
O
G
S
N
Q
P
E
PARK
LANYARD
HERE, SEE
INSTRUCTIONS.
C
1
SECTION E-E
SCALE 1:1
PARK
LANYARD
HERE, SEE
LABEL CARDS DETAIL
INSTRUCTIONS.
TABLE 1
PRODUCT NO.
ITEM 6 (m)
ITEM 41 (m)
ITEM 42 (m)
803S0019
2.9
2.1
803M0019
2.9
2.2
803L0019
3.1
2.3
803XL0019
3.3
2.4
STITCH PATTERN MATRIX
9598561
9598564
9598565
9598573
M046-12-WHITE
M046-12-WHITE
M046-12-WHITE
M092-BLACK
FuLL BoDy HArnEss
USER INSTRUCTIONS
1
1
2
3
4
Attachment
Elements
REVISION RECORD
DATE D/M/Y REV ECO
DESCRIPTION
DR APP
29/03/2018
A
52938 RELEASE FOR PRODUCTION
SN OR
A
REVISION RECORD
DATE D/M/Y REV ECO
DESCRIPTION
DR APP
05/04/2017
A
52186 RELEASE FOR PRODUCTION
SN OR
A
SEE NOTE 5
ITEM 47 (m)
ITEM 50 (m)
ITEM 53
2.25
0.5
9500168
2.35
0.5
9500169
2.45
0.6
9500170
2.55
0.7
9500171
UNLESS OTHERWISE SPECIFIED
© 3M COPYRIGHT
DIMENSIONS ARE IN MILLIMETERS
This document is the copyrighted property of
TOLERANCES ON:
the 3M Company and may not be reproduced
0 PL DECIMALS
.5
without 3M written permission or used for other
THIRD ANGLE PROJECTION
1 PL DECIMALS
.10
than 3M authorized purposes.
2 PL DECIMALS
.05
SCALE: 1:5
CREO
SILVERWATER, NSW, AUSTRALIA
ANGLES
0.5 °
TITLE
HARN DELTA LIVE LINE
INITIALS
DATE D/M/Y
S/S MEDIUM
DRAWN
SN
29/03/2018
DO NOT
DRAWING NUMBER
REVISION
9598598
CHECKED
OR
29/03/2018
SCALE
803M1009
A
APPROVED
OR
29/03/2018
M046-15-WHITE
DRAWING
SHEET 1 OF 2
PARK
LANYARD
HERE, SEE
INSTRUCTIONS.
3
2
PARK
LANYARD
HERE, SEE
INSTRUCTIONS.
ITEM 46 (m)
ITEM 48
2.1
0.4
9500168
2.2
0.5
9500169
2.3
0.6
9500170
2.4
0.7
9500171
PARK
UNLESS OTHERWISE SPECIFIED
LANYARD
© 3M COPYRIGHT
DIMENSIONS ARE IN MILLIMETERS
HERE, SEE
INSTRUCTIONS.
TOLERANCES ON:
This document is the copyrighted property of
the 3M Company and may not be reproduced
0 PL DECIMALS
.5
without 3M written permission or used for other
THIRD ANGLE PROJECTION
than 3M authorized purposes.
1 PL DECIMALS
.10
2 PL DECIMALS
.05
SCALE: 1:5
CREO
SILVERWATER, NSW, AUSTRALIA
ANGLES
0.5 °
TITLE
HARN DELTA II RIGGERS
INITIALS
DATE D/M/Y
FFA RFA RL DX QC M
SN
05/04/2017
DRAWN
9598598
OR
05/04/2017
DO NOT
DRAWING NUMBER
REVISION
CHECKED
803M0019
A
05/04/2017
SCALE
M046-15-WHITE
APPROVED
OR
DRAWING
SHEET 1 OF 2
3M™ DELTA
9598647 R
. B
Ev
5
6
7
8
9
10
Buckles and
other
Adjusters
Elements
PARK
LANYARD
HERE, SEE
INSTRUCTIONS.
®
11
12
13
Pads
© 3M 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 306S1043 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for 3M 306S1043

Summary of Contents for 3M 306S1043

  • Page 1 DIMENSIONS ARE IN MILLIMETERS 5. FREE STITCHING 9598574 TO USE THREAD M092-BLACK. This document is the copyrighted property of TOLERANCES ON: the 3M Company and may not be reproduced 0 PL DECIMALS without 3M written permission or used for other THIRD ANGLE PROJECTION 6.
  • Page 2 DIMENSIONS ARE IN MILLIMETERS 6. FREE STITCHING 9598574 TO USE THREAD MO92-BLACK. TOLERANCES ON: This document is the copyrighted property of the 3M Company and may not be reproduced 0 PL DECIMALS without 3M written permission or used for other THIRD ANGLE PROJECTION than 3M authorized purposes.
  • Page 3 Harness Harness Attachment Buckles and other style Model Elements Adjusters Elements Pads 823S1035 823M1035 823L1035 823XL1035        823S1035X 823M1035X 823L1035X 823S1050 823M1050      823L1050 823XL1050 823S1051 823M1051    ...
  • Page 4 ü ü...
  • Page 6 TIGHTEN LOOSEN...
  • Page 8 PULL DEPLOY 1. DEPLOY BOTH PACKS. 2. INSERT HOOK INTO LOOP ON OPPOSITE STRAP. 3. PLACE BOTH FEET INTO WEB LOOP. 4. REHOOK TO ADJUST LOOP LENGTH IF REQUIRED. 3M.com/FallProtection PARK PARK LANYARD LANYARD HERE, SEE INSTRUCTIONS. HERE, SEE INSTRUCTIONS.
  • Page 9 PARK LANYARD PARK LANYARD HERE, SEE INSTRUCTIONS. HERE, SEE INSTRUCTIONS. PARK LANYARD PARK LANYARD PARK LANYARD PARK LANYARD HERE, SEE INSTRUCTIONS. HERE, SEE INSTRUCTIONS. HERE, SEE INSTRUCTIONS. HERE, SEE INSTRUCTIONS.

  • Page 10: Safety Information

    Never exceed the maximum free fall distance specified for your Fall Protection equipment. Do not use any Fall Protection equipment that fails inspection, or if you have concerns about the use or suitability of the equipment. Contact 3M Technical Services with any questions.

  • Page 11: Product Description

    Before using this equipment, record the product identification information from the ID label in the “Inspection and Maintenance Log” at the back of this manual. Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M Technical Services for updated instruction manuals.
  • Page 12 Table 1 - Product Specifications Available Harness Sizes Figure 1 organizes harness models into groups based on available features. All harness models within the same group will include the same features but will vary in sizing options. See the below image for reference. To determine the size of your harness, refer to the topmost portion of your Harness Label Strap (A), then refer to the “Product Size Codes”...

  • Page 13: System Use

    Hazards may include, but are not limited to: high heat, chemicals, corrosive environments, high voltage power lines, explosive or toxic gases, moving machinery, sharp edges, or overhead materials that may fall and contact the user or equipment. Contact 3M Technical Services for further clarification.
  • Page 14 LANYARD PARKING ATTACHMENT: Figure 5 illustrates Lanyard Parking. The Lanyard Parking Attachment is for attaching the free end of a Lanyard or harness-mounted Self-Retracting Device when not connected to an anchorage connection point for purposes of Fall Protection. Lanyard Parking Attachments must never be used as a Fall Protection attachment element on the Harness for connecting a Lanyard or Self-Retracting Device (A).

  • Page 15: Installation

    Clearly tag the system “DO NOT USE”. See Section 5 for more information. FASTENING BUCKLES: 3M Harnesses are equipped with a variety of Buckles for fastening and adjusting Leg Straps and Chest Straps. See Figure 1 for the buckle types present on your Delta Harness. Figure 9 illustrates operation of each of...
  • Page 16 Clearly tag the system “DO NOT USE”. See Section 5 for more information. SySTEM APPLICATIONS: 3M Harnesses may be used for Fall Protection applications as specified in these instructions. See Figure 2 for reference. This product may be used for the following Fall Protection applications:...

  • Page 17: Maintenance, Service, And Storage

    DEFECTS: If the product cannot be returned to service because of an existing defect or unsafe condition, or because it has been subjected to fall arrest or impact force, then the product must be either destroyed or sent to 3M for replacement.

  • Page 18: Labels And Markings

    DEFINITIONS: The following terms and definitions are used in these instructions. For a comprehensive list of terms and definitions, please visit our website: www.3m.com/FallProtection/ifu-glossary • AUTHORIZED PERSON: A person assigned by the employer to perform duties at a location where the person will be exposed to a fall hazard.
  • Page 19 Table 1 – Inspection and Maintenance Log Serial Number(s): Date Purchased: Model Number: Date of First Use: Inspection Date: Inspected By: Inspection: (See Section 5 for Inspection Frequency) Component: User Competent Person Harness Hardware Inspect harness hardware including buckles (1), adjusters (2), D-rings (3), SRD Loops (Diagram 1) (4), loop keepers (5), Lanyard Keepers (6), etc.
  • Page 20 This page intentionally left blank.
  • Page 21 This page intentionally left blank.
  • Page 22 This page intentionally left blank.
  • Page 23 LIMITED REMEDY: Upon written notice to 3M, 3M will repair or replace any product determined by 3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be returned to its facility for evaluation of warranty claims. This warranty does not cover product damage due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 3M’s control.
  • Page 24 3M’s option, to the repair or replacement of the goods or the refund of the purchase price of the goods. 3M will not be liable for any equipment damage resulting from wear, abuse, damage in transit, failure to maintain the product or other damage beyond the control of 3M.

This manual is also suitable for:

306m1043306l1043306xl1043306m1043e306l1043e320s2066nk ... Show all

Table of Contents