Table of Contents
Advertisement
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit www.3m.com/userinstructions or
contact 3M Technical Services for updated instruction manuals.
PRODUCT OVERVIEW:
Figure 1 illustrates available product models. Lifeline subsystems secure to a vertical lifeline to provide an adjustable anchorage
connection point for the user. The product models covered in these instructions may be used for Fall Arrest or Restraint
applications.
The lifeline subsystem is comprised of a Handle Spring (A) that contacts the Lanyard Connection Handle (C). The Enclosure (D)
makes up the body of the rope grab. The Hinged Rope Retainer (E) is locked in the closed position around a vertical lifeline using
a removable Detent Pin (B). The Locking Roller (F) and Roller Cam (H) are designed to lock on the vertical lifeline in the event of
a fall. The Gravity Lock (G) prevents the rope grab from being installed upside-down on the vertical lifeline. The Chain Sash (I)
attaches the Detent Pin to the Rope Grab.
See Table 1 for more information on Component Specifications.
A
C
Figure 3 - Components
B
D
I
G
3
E
F
H
Advertisement
Table of Contents
