Download Print this page
Runxin N74Q1 Quick Start Manual

Runxin N74Q1 Quick Start Manual

Multi-functional flow control valve for water treatment systems

Advertisement

Quick Links

Multi-functional Flow Control Valve for
1. Basic Setting & Usage
1.1 The Function of PC Board
A. Button lock indicator
When the fourth decimal point of digital tube turns on, it indicates the
buttons are locked. At this moment any single button will not work (No
operation in one minute, the fourth decimal point of the digital tube will light
on and lock the buttons.)
 Solution: Press and hold both
point lights off.
Water Treatment Systems
65510 (Old Model No.: N74Q1)
65610 (Old Model No.: N74Q3)
55510 (Old Model No.: N75Q1)
55610 (Old Model No.: N75Q3)
and
for 5 seconds until the decimal
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the N74Q1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Runxin N74Q1

  • Page 1 Multi-functional Flow Control Valve for Water Treatment Systems 65510 (Old Model No.: N74Q1) 65610 (Old Model No.: N74Q3) 55510 (Old Model No.: N75Q1) 55610 (Old Model No.: N75Q3) 1. Basic Setting & Usage 1.1 The Function of PC Board A. Button lock indicator When the fourth decimal point of digital tube turns on, it indicates the buttons are locked.
  • Page 2 B. Time of day indicator  When“:”flashes, it indicates the time of day. C. Program mode indicator  The third decimal point of digital tube turns on, it indicates the program display mode. Use to view all values.  The third decimal point of digital tube flashes, it indicates the program set mode.
  • Page 3 3. Press to finish adjustment, press to return. 1. Under the Regeneration Time display status, press enter into program set mode. Regeneration hour value Regeneration flashes, press to adjust the hour value. Time 2.Press again, regeneration minute value flashes, press to adjust the minute value.
  • Page 4 2. Press to finish adjustment, press to return. 1. Under the Signal Output Mode display status, Press enter into program set mode. Signal output mode value Signal Output flashes, press to adjust the value. Mode 2. Press to finish adjustment, press to return.

This manual is also suitable for:

N74q3N75q1N75q3655106561055510 ... Show all