Download Print this page
INTERSPIRO Spiromatic Disinfection Manual

INTERSPIRO Spiromatic Disinfection Manual

Mask with breathing valve

Advertisement

Quick Links

Spiromatic and Divator mask with breathing valve
Important:
Always start by washing the mask and breathing valve in accordance with the user
manual and/or separate washing instruction.
The mask and breathing valve must be disinfected separately.
Use the disinfectant recommended by Interspiro.
The Interspiro disinfectant is highly flammable, read the safety data sheet.
Make sure that there is good ventilation.
Use the protective equipment stipulated by your organization to protect against virus exposure.
Disinfection of the mask
• If applicable, open the hatch on
masks fitted with Divator hatch
and Spirohatch.
• Place the mask in the disin-
fectant, make sure that the entire
mask is covered.
• Leave the mask in the disin-
fectant solution for 5 minutes.
Longer exposure times might
cause damage to the equipment.
• Thoroughly rinse the mask
in fresh water.
55204A01
Disinfection
5 min
• Shake off excess water.
Max 55°C
!
• Leave the mask to dry. A
drying cabinet can be used,
maximum 55 °C for 2 hours.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Spiromatic and is the answer not in the manual?

Questions and answers

Summary of Contents for INTERSPIRO Spiromatic

  • Page 1 The mask and breathing valve must be disinfected separately. • Use the disinfectant recommended by Interspiro. • The Interspiro disinfectant is highly flammable, read the safety data sheet. • Make sure that there is good ventilation. • Use the protective equipment stipulated by your organization to protect against virus exposure.
  • Page 2 Disinfection of the breathing valve • Attach a breathing hose to the breathing valve. Make sure to not get any disin- fectant into the open end of the hose. • Put the parts in the disin- fectant and move it all 5 min around to get disinfectant on all surfaces.

This manual is also suitable for:

Divator