Selecting An Image Source - Epson CO-FD01 User Manual

Selecting an Image Source

When multiple image sources are connected to the projector, you can switch
from one image source to the other.
a Make sure the connected image source you want to use is turned on.
b For video image sources, insert a DVD or other video media and press
play.
c
Do one of the following:
• Press the button on the remote control until you see the image
from the source you want.
This screen is displayed when no image signal is detected.
Check the cable connections between the projector and image
source.
a
• Press the button on the remote control.
Then select the source you want to use from the screen displayed.
When no image signal is detected, check the cable connections
between the projector and the image source.
a
43