Projection Modes; Changing The Projection Mode Using The Remote Control; Changing The Projection Mode Using The Menus - Epson CO-FD01 User Manual

Projection Modes

Depending on how you positioned the projector, you may need to change the
projection mode so your images project correctly.
• Front lets you project from a table in front of the screen.
• Front/Upside Down flips the image over top-to-bottom to project upside-
down from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent
screen.
• Rear/Upside Down flips the image over top-to-bottom and horizontally to
project from a ceiling or wall mount and behind a translucent screen.
g g Related Links
• "Changing the Projection Mode Using the Remote Control"
• "Changing the Projection Mode Using the Menus"
• "Projector Setup and Installation Options"
Changing the Projection Mode Using the Remote
Control
You can change the projection mode to flip the image over top-to-bottom.
a
Turn on the projector and display an image.
b Hold down the button on the remote control for five seconds.
The image disappears briefly and reappears flipped top-to-bottom.
c To change projection back to the original mode, hold down the
button for five seconds again.

Changing the Projection Mode Using the Menus

You can change the projection mode to flip the image over top-to-bottom
and/or left-to-right using the projector menus.
p.32
p.32
p.17
a Turn on the projector and display an image.
b Press the button on the remote control.
c Select the Settings menu and press [Enter].
Select Installation > Projection and press [Enter].
d
e
Select a projection mode and press [Enter].
f Press to exit the menus.
32