Safety; Important Notice; Important Safety Notes; Disclaimer - Haes ESA-2001 Installation, Commissioning & Operating Manual

Table of Contents

ESPRIT-Addressable Repeater User Manual

SAFETY

PLEASE READ THIS MANUAL CAREFULLY BEFORE HANDLING THE EQUIPMENT AND

OBSERVE ALL ADVICE GIVEN WITHIN IT.

THIS PARTICULARLY APPLIES TO THE PRECAUTIONS NECESSARY TO AVOID

ELECTRO-STATIC DISCHARGE

The panel is safe to operate provided it has been installed in compliance with the

manufacturer's instructions and used in accordance with this manual.

Hazardous voltages are present inside the panel—DO NOT open it unless you are qualified

and authorised to do so. There is no need to open the panel's enclosure except to carry out

commissioning, maintenance and remedial work. This work must only be carried out by

competent service personnel who are fully conversant with the contents of the panel's

installation manual and have the necessary skills for maintaining this equipment.

The product must be installed, commissioned and maintained for operation, including periodic

checks, in accordance with applicable codes of practice, national standard regulations and

local instructions for fire systems appropriate to the country and location of the installation. It

is the responsibility of the system user to ensure it is regularly serviced and maintained in

good working order.

No responsibility can be accepted by the manufacturer or distributors of this fire alarm panel

for any misinterpretation of an instruction or guidance note or for the compliance of the

system as a whole. The manufacturer's policy is one of continuous improvement and we

reserve the right to make changes to product specifications at our discretion and without

prior notice. E & O E.

Before installation, refer to the Ratings shown on the label inside the product

and to the 'Specifications Chart' in this document. If you are unclear on any

point, please DO NOT proceed. Contact the manufacturer or supplier for

clarification and guidance.

Only Trained service personnel should undertake the Installation,

Programming and Maintenance of this equipment.

Approved Document Ref: UI-ESA-03 Issue 2.0

SAFETY

Table of Contents