Table of Contents
Advertisement
ESPRIT-Addressable Repeater User Manual
Software Downloads
The Haes Configuration panel software enhances the ease of programming of the panel, by
enabling the engineer to both download existing panel configurations for amendment, or
programme new panel configuration 'off panel' before uploading onto the panel. Programming
of the configuration uses easy to follow tables.
The Haes Configuration panel software is available to be downloaded from the Haes website:
www.https://haes-tech.com
User Controls
Three levels of control, with programmable code entry, are available on the panel:
•
General User (Access level 1)
•
Authorised User (Access level 2)
•
Engineer (Access level 3) (CONFIG Mode).
In General User (Access level 1) mode; most of the keypad controls are inactive, to protect
the system from unauthorised operation.
The use of a code entry to activate the controls is enabled by default but can be disabled in
the Level 3 engineering functions.
Once the panel is powered up, the LCD screen will display any faults found, accompanied by
the relevant status LEDs flashing and a warning tone. After clearing any faults found, the
Title screen will be displayed. The General User (Access level 1) are then available.
General User Controls
The General User (Access Level 1) controls are accessible when the Activate Controls key
is set to Off and four-digit access code has not been entered.
Available Functions
The functions that can be performed in Access Level 1 are:
•
Mute the internal buzzer
•
View active faults
•
Change from General User to Authorised User; using either the Activate Controls key
switch, or by entering the four-digit code to access level 2
Authorized User Controls
The Authorized User (Access level 2) controls can be accessed by:
•
turning the Activate Controls key clockwise into the 'On' position. The padlock symbol
will show unlocked and all the buttons on the keypad will be operational. To
deactivate the controls, turn the key back to the OFF position. The padlock symbol
will show locked.
or
•
entering four-digit code 1111:
o Press ✓ key
o Use the Up/Down arrow keys to increase/decrease the number value
o Use the Left/Right arrow keys to move to the next digit in the 4-digit sequence
Approved Document Ref: UI-ESA-03 Issue 2.0
OPERATING INSTRUCTIONS
16
Advertisement
Table of Contents
