Table of Contents
Advertisement
ESPRIT-Addressable Repeater User Manual
INSTALLATION
Safety
This product should be installed, commissioned and maintained by, or under the supervision
of, competent persons according to good engineering practice and,
i.
BS 7671 (IEE wiring regulations for electrical installations)
ii.
Local codes of practice
iii.
Statutory requirements and national standard regulations for fire systems
appropriate to the country and location of the installation.
iv.
Any instructions specifically advised by the manufacturer.
You are requested to take such steps as are necessary to ensure that any appropriate
information about this product is made available by you to anyone concerned with its use.
Further copies of this User Instruction Manual are available from the website
www.https://haes-tech.com.
This equipment is designed to be operated from 230V AC 50/60 Hz mains supplies and is of
Class I construction. As such it must be connected to a protective earthing conductor in the
fixed wiring of the installation. Failure to ensure that all conductive accessible parts of this
equipment are adequately bonded to the protective earth will render the equipment unsafe.
THIS IS A PIECE OF CLASS I EQUIPMENT AND MUST BE EARTHED
Only trained, suitably skilled and technically competent service personnel
!
should undertake the Installation, Programming and Maintenance of this
equipment.
ESD Precaution
This particularly applies to the precautions necessary to avoid Electro-Static Discharge.
This equipment is constructed with static sensitive components. Wear an anti-static earth
strap connected to panel enclosure's earth point. Before installing or removing any printed
circuit boards, or connecting cables, remove all sources of power (mains and battery).
Approved Document Ref: UI-ESA-03 Issue 2.0
INSTALLATION
10
Advertisement
Table of Contents
