ESPRIT-Addressable Repeater User Manual
o When all 4 digits have been set to the code 1111, press enter ✓ key once
again
o The MAIN MENU will become available for operation.
Once the code is entered, or the Activate Controls key is turned to On, the LCD unit will
display the MAIN MENU. Use the Scroll Control keypad up/down and left/right arrows, and
the enter ✓ key to navigate the Access level 2 menu.
Note: If the Activate Controls key is in the On position, the keypad will remain active.
Note: It is not possible to remove the key, whilst it is in the On position.
Note: The padlock symbol is shown on the LCD screen, to the right of the Time and Date
indication.
Note: The Access level 2 code 1111 is the factory default. The access code may be changed from the
CONFIG menu.
Available Functions
The functions that can be performed at Access level 2 are:
•
Resound the alarms
•
Silence the alarms
•
Reset the system
•
Mute the internal buzzer
•
Access the Authorised User (Access level 2) menu structure, from the icons on the
MAIN MENU
•
Access the CONFIG menu (Access level 3) Engineer controls, for configuration and
commissioning of the system, by entering the Engineer Access level 3 four-digit
access code
Authorised User Menu Options
All menu options except CONFIG on the MAIN MENU are available to an Authorised user.
Engineer Controls
The Engineer (Access level 3) controls can be accessed by:
•
From the Authorised User (Access level 2) MAIN MENU, use Left/Right arrow keys
to move cursor to CONFIG menu icon
•
Press ✓ key to select CONFIG menu. The digital display will show the following
message:
Enter Level 3 Access Code
•
Use the keypad to enter code 3333:
o Press ✓ key
o Use the Up/Down arrow keys to increase/decrease the number value
o Use the Left/Right arrow keys to move to the next digit in the 4-digit sequence
o When all 4 digits have been set to the code 3333 press ✓ key once again.
The Access level 3 menu will become available for operation.
Approved Document Ref: UI-ESA-03 Issue 2.0
OPERATING INSTRUCTIONS
17