ESPRIT-Addressable Repeater User Manual
▪
Ends: LAST/1
the date, to show when the local Day Light Savings time ends (e.g. –
Ends: 4th Tuesday OCT)
▪
Auto Update DayLight Savings: YES/NO - adjust to turn on or off
the automatic switching of the system clock forward by 1 hour to
match local DST
▪
DST: ACTIVE / IN-ACTIVE – not amendable, automatically shows the
current DST state, dependent on the above settings.
•
Press return
MAIN MENU: LAMP TEST
To operate the LAMP TEST menu, to test the panel LCD display and warning LEDs:
•
Under MAIN MENU highlight the Lamp Test option, and then press ✓ key to select
it. This action will enable the lamp test mode: a long acknowledgement sound will be
present, the digital display will go OFF, and the following LEDs will come on, at the
same time, for a couple of seconds:
•
General Fire
•
General Fault
•
Supply Healthy
•
Delay Status
•
Disablement
•
Power Supply Fault
•
Sounder Status
•
Test Mode
•
System Fault
Note: After the lamp test has been performed, the LCD digital display will turn back ON
(displaying the MAIN MENU), after all LEDS have extinguished and the long
acknowledgement sound has stopped.
MAIN MENU: CONTRAST
To set the LCD screen contrast and backlight, operate the Contrast menu:
•
Under MAIN MENU highlight the CONTRAST option, and then press ✓ key to select
it
•
Under the CONTRAST sub-menu, the two following options will be available:
o CONTRAST: use the left and right arrow keys to adjust the value
o BACKLIGHT: using the up and down arrow keys, one of the following values
can be set: MIN, HALF, and MAX
•
Press return
be present.
Approved Document Ref: UI-ESA-03 Issue 2.0
st
nd
rd
th
/2
/3
/4
key once to return to TIME&DATE menu.
key to return to MAIN MENU. A short acknowledgement sound will
CONFIGURING THE SYSTEM
Monday – Sunday
Jan - DEC - adjust
28