AZUD HELIX AUTOMATIC 201 DLP User Manual page 26

CONTROL UNIT IN
BACKFLUSH PROCESS
Wait until backflushing cycle is
finished
For the identification of the components consult section "Components and Spares" from the
Water Filtration Solutions
WATER IN THE DRAINAGE
MANIFOLD
CKECK THE CONTROL
UNIT SITUATION
Water still remains in the drainage
If the problem persists or you have
any doubt, contact your distributor.
CONTROL UNIT IN
FILTRATION PROCESS
VERIFY EACH OF THE
COMMAND MICROTUBES
WHICH FEED THE HYDRAULIC
VALVES CHAMBERS
PRESENCE OF FLUID
THROUGH ANY OF THE
MICROTUBES WHICH
FEED THE VALVES
CHAMBERS
CHECK THE
CORRESPONDING
SOLENOID
manual
THERE IS NO FLOW OF
FLUID IN THE
MICROTUBES WHICH
FEED THE VALVES
CHAMBERS
CHECK THE
CORRESPONDING
HYDRAULIC VALVE
26