COMGROW CNC Carving Machine User Manual page 10

3. Open Grblcontrol software
1.You can obtain this software from others,
or you can use our complimentary software .
Open the SD card and find "software",
then select "win".
2.Select "Grblcontrol (Candle_1.1.7)"
3.Find the"Grblcontrol (Candle) .exe"
and open it .
16
4.Grblcontrol Use
•
Click Service
•
Choose COMX port
•
Click OK，connect
•
Check connection display，if 'Not Connected' is displayed，
connection fails if 'Port Opened' is displayed, connection is done
Connection Display
17