Required Materials - Peleman Hard Cover Maker 650 User Manual

Required Materials

The Hard Cover Maker 650 uses a unique and patented way of casing and
wrapping in. It is an environmentally friendly solution which requires low
maintenance and helps cutting costs. Such a unique casing-in system asks
for some unique components and products.
Hard Cover Basic
The Hard Cover Basic is an in-house designed innovative and patented
pre-made cover de¬veloped for use with the Casemaking systems. The
Hard Cover Basic is covered with a thin layer of hotmelt on the outside and
inside.
We are able to provide 4 differents Hard Cover Basic types:
The 3-pieces Hard Cover Basic with 3 pieces of 2,7mm thick
greyboard.
For traditional bookbinding and casing-in.
The 3-pieces Hard Cover Basic with 2 pieces of 2,7mm thick
greyboard and the middle piece in 0,3mm thick steel sheet
covered with 2 resins: the binding resin and the casing-in
resin. To use with the Mirror Sheet to finish the inner side of
the book.
For binding with Resin SteelBinding.
The one-piece Hard Cover Basic with 2 creases in the
2,7mm thick greyboard. To use with the Mirror Sheet.
For ring binders, folders, portfolios...
The one-piece Hard Cover Basic in 2,7mm thick greyboard.
To use with the Mirror Sheet.
For displays, top cards, game boards...
For the Hard Cover Basic Box in combination with the Clips:
2.7mm thick cardboard.
glossy side = hot melt side
9