Advertisement
My Mirror Sheet sticks on the protection frame
Make sure you place the Mirror Sheet with the glossy side (melt side)
down. To remove the Mirror Sheet from the protection frame, see
chapter maintenance. If you have placed the Mirror Sheet with the
glossy side down, try to select another program that corresponds
with the cover material. If you have tried all programs and still no
appropriate result, contact your local Peleman reseller. Also try
to clean the Teflon sheet with the Seal & Bond remover Aerosol
(SP000SPRAY).
My cover is not aligned perfectly
You can use our pre-set templates. Contact your Peleman reeller for
more information. It is also important to use the Positioning Corners to
align your cover.
25
Advertisement
