Advertisement
Annex I
Bellow an overview of the various displays shown on the Hard Cover Maker 650.
Bootscreen
The Peleman logo will appear for 10 seconds.
Heating up
This screen will appear right after the Peleman logo. It
will be shown during the period the Hard Cover Maker
650 is preheating. While the bar fills gradually as it gets
warmer, the heating pictogram blinks
Ready to use
When the Hard Cover Maker 650 is ready to use, a
checkmark is shown on the screen. The currently
active program can be found on the left. After every
procedure this screen is shown.
Press
When you close the tray (4), the display shows a
blinking pictogram, meaning the pressing process
started. Meanwhile the bar fills gradually as pressing
time goes by.
Program menu
This display indicates you are in the program menu.
Stand-by
When the Hard Cover Maker 650 is not being used
during 30 minutes, it will go in stand-by mode to 80%
of the programmed value.
When the Hard Cover Maker 650 is not being used
during 60 minutes, it cools down and shuts off.
27
Advertisement
