Advertisement
Lower the protection frame and close
the tray to start pressing. As soon as
the tray is locked the display shows
a pictogram blinking: pressing is in
process.
A beep indicates the end of the
pressing cycle. Now the sides are
wrapped and the Mirror Sheets are
glued to the Basic Peleman Box
plano.
Open the tray and lift the protection
frame. Place the softpad on top of the
plano with the Mirror Sheets and do a
second pressing. A beep indicates the
end of the pressing cycle.
Remove the Wrapping clamps
Repeat these steps for the other side
(bottom) of the Basic Peleman Box.
Your Basic Peleman Box is now ready!
SCAN
FOR VIDEO
19
Advertisement
