Advertisement
Tips & tricks
To avoid change of appearance of the cover material.
The appearance of some delicate cover materials changes under the influence
of heat, therefore we advise to try the different program settings until it resolves.
If you are using thicker cover material use the adviced Wrapping Clamps*.
*SEE PAGE 15
When the appearance keeps changing you can place the Application softpad
on top.
Make sure you have removed the Wrapping Clamps.
Place the Hard Cover Basic with the Mirror Sheets up on the table.
Afterwards you can lay the softpad on the Hard Cover Basic.
Lower the protection-frame and close the tray before pressing.
20
Advertisement
