Table of Contents
Advertisement
2. To enable the repeater channels, press the LOCK button. Use the
VOLUME buttons to choose between "oF" and "oN".
3. Press the LOCK button to confirm your selection. YOU MUST PRESS
THE LOCK BUTTON TO CONFIRM YOUR SELECTION OR THE
REPEATER CHANNEL SELECTION WILL NOT BE CHANGED.
• When activated the repeater channels will be displayed as the channel
number (Ex. 15, 16, 17, etc.) and the RP icon
• Repeater channels will appear immediately following the standard
GMRS channels (ex: 20, 21, 22, 15rP, 16rP, 17rP, etc.)
DISPLAY COLOR
The MXT575 has seven different adjustable LCD display colors.
1. Press the MENU button to enter the menu. Use the VOLUME buttons to
navigate to menu settings "db"
2. So set the display color, press the LOCK button. Use the VOLUME
buttons to choose between oF, 01, 02, 03, 04, 05, 06 and 07.
• When scrolling through the seven options, the display will preview the
colors.
3. Press the LOCK button to confirm your selection. YOU MUST PRESS
THE LOCK BUTTON TO CONFIRM YOUR SELECTION OR THE
DISPLAY COLOR WILL NOT BE CHANGED.
SELECTING A CHANNEL BANDWIDTH
GMRS radios may operate in wide band mode, maximum 20 kHz occupied
bandwidth. FRS radios are limited to narrow band mode, maximum 12.5
kHz occupied bandwidth, by FCC regulations. For best clarity, all radios
communicating together should use the same bandwidth. Midland GMRS
radios use narrow band mode to provide optimum communication and
spectrum efficiency with both FRS and GMRS radios which share the 12.5
kHz spaced FRS/GMRS channel frequencies. For systems using wide
band GMRS radios, the MXT575 channel bandwidth can be switched to
wide band mode.
1. Press the MENU button to enter the menu. Use the VOLUME buttons to
navigate to menu setting "bs".
midlandusa.com
Model MXT575
Page 25
Hide quick links:
Advertisement
Table of Contents
