Display Symbols - Midland G15 GMRS Portable Owner's Manual

CAUTION: DON'T EXPOSE THE DISPLAY TO EXTREME HOT OR
COLD TEMPERATURE
1. Channel number: Displays channel number 1-10.
2. RX Symbol Indicates busy channel.
3. TX Symbol Indicates unit transmitting.
4. CTCSS Code Symbol: Indicates "CTCSS" tone is active
5. DCS Symbol: Indicates that Digital Coded Squelch mode is on.
6. Musical note indicates ROGER BEEP is on.
7. SAVE Symbol: Flashes indicating battery save is active.
8. Key Symbol indicates when the keypad has been locked. Only the "PTT" and
"CALL" buttons are active when this indicator is on.
9. Shows the "CTCSS" or "DCS" code you have selected. When this is on, other
radios you talk to must be set to the same code.
10. DW Symbol: Indicates Dual Watch channel selection is active.
11. VOX Symbol: Indicates "VOX" is activated
12. B.SCAN indicates the scan mode B is in use. SCAN indicates the normal scan
mode is in use
13. BEEP indicates the button press tone is active.
14. Battery symbol shows the battery condition. Replace or recharge the batteries
when this indicator displays 2 or fewer segments of the battery.
15. M Symbol: Indicates a memory channel is active.
16. Number indicates memory channel in use.(when programmed)

DISPLAY SYMBOLS

7