Selecting The Transmit (Tx) Power Level - Midland MicroMobile MXT575 Owner's Manual

NOTE: "rC" and "tC" menu settings are only on repeater channels.
NOTE: DCS Privacy Codes 100-104 are shown on the LCD display as
A0-A4.
NOTE: Selecting a Privacy Code of "oF" will disable the Privacy feature.
NOTE: If you select a CTCSS Privacy Code, any pre-selected DCS
Privacy Code will be cancelled, and vice-versa.
SELECTING A TRANSMIT (TX) POWER LEVEL
The MXT575 provides up to 2 transmit power levels; Hi and Lo. The Lo
power level is generally suitable when operating under optimum conditions
(see ABOUT RANGE). The Hi power level is recommended to ensure you
get maximum range from your radio.
IMPORTANT! Channels 1-7 cannot be removed from the Lo transmit
power setting due to power output regulations.
1. Press the MENU button to enter the menu. Use the VOLUME buttons to
navigate to menu setting "Pr".
2. To edit the transmit power level, press the LOCK button. Use the
VOLUME buttons to choose between "Hi" and "Lo".
3. Press the LOCK button to confirm your selection. YOU MUST PRESS
THE LOCK BUTTON TO CONFIRM YOUR SELECTION OR THE
POWER LEVEL WILL NOT BE CHANGED.
• The transmit power will display on the LCD display, according to your
selection.
Page 22
Model MXT575
midlandusa.com