Chrysler Pacifica Hybrid 2022 Manual page 17

Guidelines for preventing fire and electric shock:
Ensure the charging cable is positioned so it will

not be stepped on, tripped over, or otherwise
subjected to damage or stress.
There are no user serviceable parts inside.

Do not use the charging cordset if it is visibly

damaged. Contact an authorized dealer for
service.
Do not place fingers, or any other objects inside

the charge connector.
Do not allow children to operate this device.

Adult supervision is mandatory when children
are in proximity when the charging cordset is in
use.
Do not use the charging cable with an extension

cord.
NOTE:
During normal operation, the charge connector or
AC plug may feel warm. If either one feels hot
during charging, unplug the charging cordset and
have a qualified electrician inspect the wall recep-
tacle before you continue charging Ú page 82.
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE
OR ELECTRIC SHOCK: Do not use the charging
cordset with a receptacle that is worn or
damaged. Using the charging cordset with a
worn or damaged receptacle may cause burns
or start a fire.
AC L 2 C
EVEL HARGING
(240 V , 32 A )
OLT MP
AC Level 2 (240 V) charging requires a 240 V, Level
2 EVSE (Charging station). A 32 Amp Level 2 EVSE
for home installation is recommended.
When using public charging stations, ensure the
charging station is ready to provide charge and the
vehicle is in PARK before the charge connector is
plugged into the vehicle's charge inlet. You will
hear a "click" when the charge connector is
inserted correctly and is coupled with the vehicle's
charge inlet. The vehicle should start charging
automatically. If not, please check the instructions
at the charging station.
GETTING TO KNOW YOUR VEHICLE
NOTE:
The vehicle should start charging automatically.
If not, please check the following:
Charging Station — Check the indications and

instructions at the charging station.
Charging Schedule — Check whether the

charging schedule is enabled and if so, whether
the vehicle is currently within the scheduled
charge time/day (weekday/weekend). If the
charging schedule is enabled within the vehicle,
you may override it for this charging event by
plugging in the charge connector, unplugging it,
and then plugging it back into the vehicle charge
inlet. Complete the double plug sequence within
10 seconds for it to override the set schedule.
Hood Ajar — Check whether the hood is open.

Charging is disabled while the hood is open, and
will resume when the hood closes.
To stop the charging process:
Press the "STOP" button located on the front of

the EVSE station.
Press the button on the charge connector first

and then remove the connector from the vehicle
charge inlet.
Plug the charge handle into the EVSE station

and coil the charging cord onto its holder. Do not
leave the charging cord lying on the ground.
15
2