Version-Up Of Rom/At-130 Board - Sony HDC-900 Maintenance Manual

1-10. Version-Up of ROM/AT-130 Board

1-10. Version-Up of ROM/AT-130 Board
The ROM (IC1 on the AT-130 board) version can be upgraded using the memory stick. Follow the
procedure shown below.
m
. Prepare the memory stick in which the upgraded program has been written.
. Refer to section 5-1 for basic operations of the setting menu.
. The version number of the ROM can be confirmed on the BOARD STATUS page of the DIAGNOSIS
menu.
1. Turn the power of the unit on. Open the VF DISPLAY page of the OPERATION menu and move the
cursor to the page number.
<VF DISPLAY>
EX : ON
ZOOM : OFF
FOCUS : OFF
ND : ON
CC : ON
IRIS : ON
WHITE : OFF
D5600K: ON
GAIN : ON
SHUTT : ON
VF DISPLAY page
2. HDC-900 :
Press the MENU SELECT switch toward the "ENTER" side to change the cursor to "?".
HDC-950 :
Press the rotary encoder to change the cursor to "?".
3. HDC-900 :
Press the MENU SELECT switch toward the "ENTER" side again. Insert the memory stick into the
camera unit with pressing the MENU SELECT switch toward the "ENTER" side, and remain
presseng the MENU SELECT switch toward the "ENTER" side so that "MEMORY STICK AC-
CESS" is displayed on the screen.
HDC-950 :
Press the rotary encoder again. Insert the memory stick into the camera unit with pressing the rotary
encoder and remain pressing the rotary encoder so that "MEMORY STICK ACCESS" is displayed
on the screen.
n
While "MEMORY STICK ACCESS" is displayed, do not eject the memory stick.
1-10 (E)
1
BATT : OFF
RETURN: ON
MESSAG: ALL
Page number
HDC-900/950 MM