Related Manuals for JWA ALECTO 68046
Summary of Contents for JWA ALECTO 68046
- Page 1 ASSEMBLY INSTRUCTION ALECTO Ottoman fold out bed 68046 INSERT PAGE NUMBER Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
-
Page 2: Pre-Assembly Preparation
PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly 4. -
Page 3: Parts List
PARTS LIST PART ITEM Headboard Frame Feet... - Page 4 STEP 1: • Prepare a floor or bench with a blanket or cardboard. • Stand the FRAME(2) one its side, have another person hold it. • Screw in the 4 x FEET(3), as shown below.
- Page 5 STEP 2: • Attached the HEADBOARD(1) to the FRAME(2) as shown below. • Mark certain the clips are clicked all the way in. ASSEMBLY IS COMPLETE...
- Page 6 PULLING OUT THE BED • Lift the headboard to an upright position. • Lift and pull the handle as shown below. • Fully extend the mechanism as show below. • To retract the bed, simply reverse the process.
-
Page 7: Regular Care
REGULAR CARE: • Protect from direct sunlight • Vacuum regularly using low suction • Rotate reversible cushions regularly CLEANING: •Do not remove cushion covers for separate cleaning even though they may have zippers • Do not wash, Do not dry clean, Do not shampoo clean •Clean with hot water extraction machine.
Need help?
Do you have a question about the ALECTO 68046 and is the answer not in the manual?
Questions and answers