Subscribe to Our Youtube Channel
Related Manuals for JWA 68435
Summary of Contents for JWA 68435
- Page 1 ASSEMBLY INSTRUCTION HACKNEY DESK ITEM CODE 68435 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
- Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly.
- Page 3 PARTS LIST Panel Metal frame...
- Page 4 STEP 1: Open the folding main frame. STEP 2: Press the plastic parts of the panel into the corresponding round steel of the metal frame.
- Page 5 STEP 3: Install an anti-fall device on the underside of the panel and lock it to the wall...
- Page 6 ASSEMBLY IS COMPLETE...
- Page 7 SAFETY BRACKETS INSTRUCTIONS 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
- Page 8 To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the 68435 and is the answer not in the manual?
Questions and answers