Update Software; Software Requirements; Check The Current Software Version - Humminbird MEGA 360 UNIVERSAL Installation Manual

Update Software

Your control head model may need a software update to work with the MEGA 360
Imaging transducer. We recommend that you read the following section completely
before starting any software updates.

Software Requirements

• APEX/SOLIX Series: 3.640 and later
• HELIX Series: 2.180 and later

Check the Current Software Version

It is helpful to review the software version number that is currently installed on the
control head and each accessory.
APEX Series
1. Press the HOME key.
2. View the Software Version listed under System Info in the Data Dashboard.
SOLIX Series
1. Press the HOME key.
2. Select Settings.
3. Select Network > Network Info.
4. The Network Info dialog box shows a section for each device connected to the
network. Scroll to each section to note the software version number listed.
HELIX Series
1. Press and hold the VIEW key.
2. Select System > System Status.
3. Confirm the Software Version listed.
Update Software 4