Table of Contents
Advertisement
Starting the software
To start the software
Agilent E6474A User's Guide
Detailed information about the software is available from the
online help. It is assumed that the software has already been
installed. If not, refer to
page 17 for installation instructions.
1 To start the software, click Start > Programs > Agilent
Wireless Solutions > E6474A > E6474A. Refer to
Figure 38
Starting E6474A software
2 When the software starts, a copyright screen (Refer to
Figure
39) is briefly displayed. If you have used the software
before, the last used project will automatically open.
Figure 39
Copyright screen
Use Your System
"Install the E6474A software."
4
on
Figure
38.
77
Advertisement
Table of Contents
