Table of Contents
Advertisement
GPS and GPS/DR
Overview
Agilent digital receiver internal GPS
Agilent digital receiver external GPS
Agilent E6474A User's Guide
To provide accurate measurement analysis and signal
synchronization, the Agilent E6474A system provides
comprehensive methods of support for Global Positioning
Systems (GPS).
The Agilent E6474A system obtains its GPS signal from a variety
of sources. GPS systems can be connected and configured using
the following methods:
GPS and GPS/DR configuration
All Agilent digital receivers are supplied with an internal GPS
system. When an Agilent digital receiver is connected to your
system, this GPS device is automatically detected. GPS signals
are passed to your system through the serial connection.
The following examples show a complete system with various
external GPS systems attached through an Agilent digital
receiver. These examples show the external GPS and receiver
connected to a PC, however the same connection can be made to
the AUX port on the E6473B hub. Refer to
Set Up Your System
Refer to
page 47
page 47
page 51
page 51
page 54
Figure 18
on page 48.
3
47
Advertisement
Table of Contents
