Table of Contents
Advertisement
How to connect a license key dongle to the E6473B hub
How to connect other devices to the E6473B hub
Agilent E6474A User's Guide
Refer to
"Batteries"
battery and how to use it.
Once the E6473B hub has been configured and an adequate
power supply has been provided, it is possible to attach devices,
such as the USB license dongle.
The USB license dongle can be plugged into any of the three
USB ports
on the front of the hub. Refer to
Figure 6
Fit the USB dongle to any of three USB ports.
The E6473B hub is part of the E6474A measurement system.
Other parts of the system that the hub supports, include:
System component
Phones
Agilent digital receivers
GPS and GPS/DR
Batteries
Indoor setup
on page 55 for more information about the
Attach USB License Dongle
Refer to
page 36
page 40
page 47
page 55
page 58
Set Up Your System
Figure
6.
3
31
Advertisement
Table of Contents
