Software Terms; Product Warranty - Johnson Controls T9200 Installation Manual

T9200
报警代码描述
编号 代码 描述
1 E1 内置温度传感器故障
高温报警，室内温度 > 55℃.
2 HI
3 LO 1) 低温报警，室内温度 < 0℃.
2) 传感器开路
4 E5 露点传感器报警
滤网报警
8 E6
9 E7 BI报警
Compliance
Johnson Controls declares that these products are in compliance with the essential requirements and other relevant provisions of the
EMC Directive and Low Voltage Directive.
产品中有害物质的名称及含量
铅
部件名称 (Pb)
塑胶部件
O
电路板及组件
O
金属部件
O
本表格依据SJ/T11364的规定编制
○ ：表示该有害物质在该部件所有均质材料中的含量均在GB/T26572规定的限量要求以下
× ：表示该有害物质在该部件所有均质材料中的含量超出GB/T26572规定的限量要求
（产品中使用的物料超出SJ/T11364标准，但在欧盟RoHS中，此项为豁免，因目前技术无法有符合SJ/T11364的替代材料）
European Single Point of Contact:
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY

Software terms

Use of the software that is in (or constitutes) this product,or access to the cloud, or hosted services applicable to this
product, if any, is subject to applicable terms set forth at www.johnsoncontrols.com/techterms. Your use of this product
constitutes an agreement to such terms.

Product warranty

This product is covered by a limited warranty, details of which can be found at
www.johnsoncontrols.com/buildingswarranty.
P/N 24-11446-00018 Rev. B Issue Date: 11 2020
有害物质
汞 镉 六价铬
(Hg) (Cd) (Cr (VI))
O O O
O O O
O O O
NA/SA Single Point of Contact:
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
多溴联苯 多溴二苯醚
(PBB) (PBDE)
O O
O O
O O
English 中文
APAC Single Point of Contact:
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142 - CHINA