Improving The Driver Installer - Kyocera M5526cdw Service Bulletin

Service Bulletin
Type Sirius
Product Library
SIRIUS KM 6.0 **
For the person who has assigned as a responsibility to access in this new site, it will be possible to download from New Cabi-
Net site ( ALL / PJ ).
When upgrading firmware or replacing PWB, etc., please upgrade each firmware (MAIN, ENGINE, MMI, etc.) to the latest
version at the same time.
* KDCN is unified as the ISO data from this time.
** The file is splitted into 3, download those 3 files together with the Merge file and execute the Merge file to merge them.

Improving the driver installer

1.
Improve the display screen when the print device cannot be found
2. Make it possible to find the operation manual in the installer
Program No.
Screen before change
Screen after change
KYOCERA Document Solutions Inc.
Ref. No.
Remarks
VER.
(Except below and TA/OLIVETTI)
6.0
(KDCN is also applied)*
- Your printing device is turned on
- Your computer is set to the correct locale/regional settings
- Choose Custom Installer in Installer type to specify an IP
address or to change SNMP settings
Use a network cable:
- Your printing device and your computer are connected to the
same network and both are connected to the internet.
Use a USB cable:
- Your printing device and your computer are connected with a
USB cable.
A
2R7-0031 (J030)
<Date> February 28, 2019
New Upgrade
Add the sentence/Change
Sentences after change
CONFIDENTIAL
For authorized KYOCERA engineers only.
Do not distribute to non-authorized parties.
B C
(Page.2/5)