Front Control Panel Leds - Supermicro 530AD-I User Manual

Front Control Panel LEDs

JF1 contains header pins for various buttons and indicators that are normally located on a
control panel at the front of the chassis. These connectors are designed specifically for use
with Supermicro chassis. Refer to the figure below for the descriptions of the front control
panel buttons and LED indicators.
POWER LED (-)
Overheat/
Fan Fail LED (-)
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to indicate
the status of HDD-related activities, including IDE and SATA activities. Refer to the table
below for pin definitions.
15 16
HDD LED (-)
NIC1 LED (-)
NIC2 LED (-)
X
Ground
Ground
1 2
Power LED
Pin Definitions (JF1)
Pin# Definition
15 Power LED
16 Vcc
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 HDD LED
14 Vcc
51
Chapter 4: Motherboard Connections
POWER LED (+)
HDD LED (+)
NIC1 LED (+)
NIC2 LED (+)
Overheat/
Fan Fail LED (+)
X
Reset Reset Button
PWR Power Button