Supermicro 530AD-I User Manual page 29

5. Replace the M.2 heatsink and the retaining screws.
Tighten the screws to secure the heatsink into place.
Notes:
• DO NOT install the bounded M.2 heatsink (refer to
heatsink installed.
• Please assemble the M.2 heatsink back to the motherboard once the M.2 device has been
removed.
• Beware of the direction when assembling the heatsink (refer to
Chapter 3: Maintenance and Component Installation
step 4 and 5) if the M.2 device has a
29
step 5).