Power Supply - Supermicro 530AD-I User Manual

Top Magnetic
Dust Filter
Bottom Magnetic
Dust Filter
Cleaning the Front Dust Filter
1. Release the filter by pushing the center of the top edge. The top pops loose.
2. Rotate the filter top downward to release it from the hinge points on the bottom.
3. Clean the filter.
4. Replace the filter. Align it with the bottom hinge points, then push the top edge into
place. Push the top center until it clicks.
The top and bottom magnetic filters can also be removed for cleaning.

Power Supply

The 530AD-I has a 750 watt power supply module. Mount the power supply on the rear floor
of the chassis. The power supply can be mounted with the fan facing either up or down.
Chapter 3: Maintenance and Component Installation
Hinge Point
Figure 3-13. Dust Filters
40
Front Dust Filter
Filter Release Point
Hinge Point