Page 2
CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”. The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
Page 3
It provides information for the installation and use of the AOC-ATG-b2TM add-on card. About this Add-on Card Supermicro AOC-ATG-b2TM is a truly exceptional 10GbE Ethernet adapter featur- ® ing the latest Broadcom NetXtreme BCM57416 Ethernet controller for your rapidly ®...
Page 4
Super AOC-ATG-b2TM Add-On Card User's Guide Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and for safety instructions to prevent damage to the system or injury to yourself. Note: Additional information given for proper system setup.
Page 5
Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML...
Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry. Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. For product support and updates, please refer to our website at http://www.supermicro.com/...
Storage humidity: 90% non-condensing relative humidity at 35°C Physical Dimensions • Card PCB dimensions: 76mm x 115mm (W x D) Note: This product is only sold as part of an integrated solution with Supermicro server systems. Available SKUs SKUs Bracket Included Description...
Page 13
Super AOC-ATG-b2TM Add-On Card User's Guide BAR CODE LAN2 LAN1 AOC-ATG-b2TM DESIGNED IN USA REV:1.00 JPAUX1 Broadcom® BCM4716 AOC-ATG-b2TM Layout...
Chapter 2: Hardware Components Major Components The following components are on the AOC-ATG-b2TM AOC-ATG-b2TM Major Components Component Name Definition Broadcom BCM4716 Ethernet controller ® Connector cage LAN1 LAN Port 1 LAN2 LAN Port 2 JPAUX1 1-2: Enable AUX Power 3-4: Disable AUX Power (Default)
Super AOC-ATG-b2TM Add-On Card User's Guide LED Indicators and Connectors LAN Ports The AOC-ATG-b2TM has two network LAN ports. These LAN ports support con- nection speeds up to 10Gbps. Plug the Direct Attached Copper (DAC) cable into the port for network connections.
Enable jumper to WoL is supported on two ports but power to AOC NIC connect standby limited to platforms with sufficient power to AOC NIC airflow when it is in standby mode (S5 state). Please consult Supermicro before enabling it.
Super AOC-ATG-b2TM Add-On Card User's Guide Major Components of AIOM Module The major components of the Supermicro Advanced I/O Modules (AIOM) are the ® card and bracket. Before a computer system can operate, all slots are required to be populated. If an AIOM module is used, be sure that the bracket is firmly installed into the chassis.
Chapter 3: Installation Chapter 3 Installation Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid dam- aging your add-on card, it is important to handle it very carefully. The following measures are generally sufficient to protect your equipment from ESD. Precautions •...
Super AOC-ATG-b2TM Add-on Card User's Guide Before Installation Before you install the add-on card, follow the instructions below. 1. Power down the system. 2. Unplug the power cord. 3. Use industry-standard anti-static equipment such as gloves or a wrist strap and follow the precautions on page 3-1 to avoid damage caused by ESD.
Chapter 3: Installation Installing the Add-on Card (with 0.5U bracket) Follow the steps below to install an add-on card into your system. (If the system is fixed onto a rack, the removal of the server top cover is not required. If the system is not anchored to a fixed structure, it is recommended to remove the system top cover for ease of installation) A.
Page 21
Super AOC-ATG-b2TM Add-on Card User's Guide B. Installing an AIOM module 1. Position the AIOM module in front of the empty slot. 2. Gently push onto the metal bracket. The AIOM module should slide into the chassis until the card is securely seated in the connector.
Page 22
Chapter 3: Installation C. Installing an AIOM module (An AIOM slot with an AIOM slot cover) 1. Remove the AIOM slot cover by unscrewing the knob and screw that attaches the bracket to the chassis. 2. Pull the bracket away and set it aside. 3.
Download the drivers from Intel Download Center or the Supermicro site at https:// www.supermicro.com/wftp/Networking_Drivers. 1. Run CDR-NIC. 2. When the SUPERMICRO window appears, click on the computer icon next to the product model. Note: If the FOUND NEW HARDWARE WIZARD screen displays on your system, click CANCEL.
Linux and Windows. Linux Drivers Use the following procedures to install drivers on the Linux operating system. Download the drivers from ftp://ftp.supermicro/Networking_Drivers/. Installing 10G Drivers for the Linux Operating System 1. Prerequisites: Install the following: –y...
Page 25
Super AOC-ATG-b2TM Add-on Card User's Guide ./configure make make install cp bnxtre.driver /etc/libibverbs.d/ echo “/usr/local/lib” >> /etc/ld.so.conf ldconfig –v Windows Drivers Use the following procedures to install drivers on the Windows operating system. Installing 10G Drivers for the Windows Operating System 1.
Need help?
Do you have a question about the AOC-ATG-b2TM and is the answer not in the manual?
Questions and answers