Audio Authority reserves the right to revise any of its hardware and software following its policy to modify and/or improve its products where necessary or desirable.
Each converter houses high-performance audio A-to-D or D-to-A circuitry in a small, mountable package. The Model 979R accepts 44.1KHz to 192 KHz PCM audio inputs. Model 979T is factory-set for 48KHz output but also allows 96KHz sample rate to be selected by internal jumper.
20 feet (6m) into or out of these products. Either optical or coaxial cables may be used on the digital connections. • If desired, mount the 979R or 979T to a surface using the built-in mounting holes.
INDICATOR RIGHT DIGITAL LEFT INPUTS: COAXIAL POWER SUPPLY OPTICAL 4.0 SPECIFICATIONS Model Number 979R 979T Analog/Digital D to A converter A to D converter Digital Input/Output Type Coaxial+optical Coaxial+optical Input Impedance 75 ohms 47.5K ohms Min Load Impedance 10K ohms...
Audio Authority guarantees that we will replace the defective product at no cost. Freight charges for the replacement unit will be paid by Audio Authority (ground service only). A copy of the invoice showing the item number and date of purchase (proof-of- purchase) must be submitted with the defective unit to constitute a valid in-warranty claim.
6.0 REGULATORY COMPLIANCE The 979T and 979R have been tested for compliance with CE and FCC rules and regulations. The Power Adaptor/Supply included has been tested for compliance with UL, CE, and CSA rules and regulations and is RoHS compliant.
Need help?
Do you have a question about the 979T and is the answer not in the manual?
Questions and answers